prikaz prve stranice dokumenta Proposition of New Testing Procedure for the Mechanical Properties of Bulk-Fill Materials
  Preuzmi
PDF 3.77 MB
Znanstveni rad - Izvorni znanstveni rad
Proposition of New Testing Procedure for the Mechanical Properties of Bulk-Fill Materials
Materials, 16 (2023), 13; 4868. https://doi.org/10.3390/ma16134868
Macan, Matea; Marošević, Ana; Špiljak, Bruno; Šimunović, Luka; Par, Matej; Marovic, Danijela; Juric-Kacunic, Danijela; Tarle, Zrinka

Citiranost:
,
Citirajte ovaj rad

Macan, M., Marošević, A., Špiljak, B., Šimunović, L., Par, M., Marovic, D. ... Tarle, Z. (2023). Proposition of New Testing Procedure for the Mechanical Properties of Bulk-Fill Materials. Materials, 16. (13). doi: 10.3390/ma16134868

Macan, Matea, et al. "Proposition of New Testing Procedure for the Mechanical Properties of Bulk-Fill Materials." Materials, vol. 16, br. 13, 2023. https://doi.org/10.3390/ma16134868

Macan, Matea, Ana Marošević, Bruno Špiljak, Luka Šimunović, Matej Par, Danijela Marovic, Danijela Juric Kacunic i Zrinka Tarle. "Proposition of New Testing Procedure for the Mechanical Properties of Bulk-Fill Materials." Materials 16, br. 13 (2023). https://doi.org/10.3390/ma16134868

Macan, M., et al. (2023) 'Proposition of New Testing Procedure for the Mechanical Properties of Bulk-Fill Materials', Materials, 16(13). doi: 10.3390/ma16134868

Macan M, Marošević A, Špiljak B, Šimunović L, Par M, Marovic D, i sur.. Proposition of New Testing Procedure for the Mechanical Properties of Bulk-Fill Materials. Materials [Internet]. 07.07.2023. [pristupljeno 20.03.2025.];16(13). doi: 10.3390/ma16134868

M. Macan, et al., "Proposition of New Testing Procedure for the Mechanical Properties of Bulk-Fill Materials", Materials, vol. 16, br. 13, Srpanj 2023. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:127:813143. [Citirano: 20.03.2025.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:127:813143
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Proposition of New Testing Procedure for the Mechanical Properties of Bulk-Fill Materials
AutorMatea Macan
AutorAna Marošević
AutorBruno Špiljak
AutorLuka Šimunović
AutorMatej Par
AutorDanijela Marovic
AutorDanijela Juric-Kacunic
AutorZrinka Tarle
Autorova ustanova(Klinički bolnički centar Zagreb)
Autorova ustanovaSveučilište u Zagrebu
Stomatološki fakultet
Znanstveno / umjetničko
područje, polje i grana		BIOMEDICINA I ZDRAVSTVO
Dentalna medicina
Sažetak (engleski)
This study analysed flexural properties, microhardness, and the degree of conversion (DC) of five bulk-fill composites under clinically relevant conditions (4 mm thick specimens) in comparison to 2 mm specimens according to ISO 4049. Additionally, the effect of rapid polymerisation on 4 mm specimens was evaluated after accelerated aging. DC was measured using Fourier transform infrared spectrometry at 2 and 4 mm thick layers, while flexural properties and Vickers microhardness were tested using... Više 16 × 2 × 2 mm or 16 × 2 × 4 mm specimens. Three polymerisation protocols were used: (I) “ISO”: 2 mm thickness, 1000 mW/cm2, double-sided; (II) “10 s”: 4 mm thickness, 1000 mW/cm2, one-sided; and (III) “3 s”: 4 mm thickness, 2600 mW/cm2, one-sided. Mechanical properties were tested after 1 day, after 10,000 thermocycles, and after 10,000 thermocycles followed by a 7-day immersion in absolute ethanol. The “ISO” protocol produced a higher DC and microhardness of all materials. Elastic modulus was significantly higher for the “ISO” protocol compared to the 4 mm specimens. The differences in flexural strength for all polymerisation protocols were equalised after thermocycling and immersion in absolute ethanol. All tested materials met the ISO 4049 flexural strength requirement (80 MPa) for all polymerisation methods and all aging conditions. Rapid polymerisation achieved nearly optimal properties (ISO), except for elastic modulus, which was significantly reduced in 4 mm samples. Sakrij dio sažetka
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMaterials
Brojčani podacivol. 16, br. 13, 4868
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma16134868
URN:NBNurn:nbn:hr:127:813143
Datum objave publikacije2023-07-07
URL dokumentahttps://www.mdpi.com/1996-1944/16/13/4868
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Imenovanje 4.0 međunarodna (CC BY 4.0)
Datum i vrijeme pohrane2025-03-06 11:59:49
accessibility

closePristupačnostrefresh

Ako želite spremiti trajne postavke, kliknite Spremi, ako ne - vaše će se postavke poništiti kad zatvorite preglednik.