prikaz prve stranice dokumenta Influence of medium on corrosion and microstructural properties of HTCS-130 tool steel for hot work
  Preuzmi
PDF 2.24 MB
Znanstveni rad - Izvorni znanstveni rad
Influence of medium on corrosion and microstructural properties of HTCS-130 tool steel for hot work
U: 18th International Foundrymen Conference Coexistence of material science and sustainable technology in economic growth. Sisak: University of Zagreb Faculty of Metallurgy, 2019. str. 188-205. urn:nbn:hr:115:433032
Brajčinović, Sandra; Begić Hadžipašić, Anita; Medved, Jožef; Kožuh, Stjepan

Citirajte ovaj rad

Brajčinović, S., Begić Hadžipašić, A., Medved, J. i Kožuh, S. (2019). Influence of medium on corrosion and microstructural properties of HTCS-130 tool steel for hot work. 18th International Foundrymen Conference Coexistence of material science and sustainable technology in economic growth (str. 188-205). Sisak: University of Zagreb Faculty of Metallurgy. Preuzeto s https://urn.nsk.hr/urn:nbn:hr:115:433032

Brajčinović, Sandra, et al. "Influence of medium on corrosion and microstructural properties of HTCS-130 tool steel for hot work." 18th International Foundrymen Conference Coexistence of material science and sustainable technology in economic growth, University of Zagreb Faculty of Metallurgy, 2019, str. 188-205. https://urn.nsk.hr/urn:nbn:hr:115:433032

Brajčinović, Sandra, Anita Begić Hadžipašić, Jožef Medved i Stjepan Kožuh. "Influence of medium on corrosion and microstructural properties of HTCS-130 tool steel for hot work." U 18th International Foundrymen Conference Coexistence of material science and sustainable technology in economic growth, 188-205. Sisak: University of Zagreb Faculty of Metallurgy, 2019. Citirano 16.04.2024.. https://urn.nsk.hr/urn:nbn:hr:115:433032

Brajčinović, S., et al. (2019) 'Influence of medium on corrosion and microstructural properties of HTCS-130 tool steel for hot work', 18th International Foundrymen Conference Coexistence of material science and sustainable technology in economic growth, University of Zagreb Faculty of Metallurgy, Sisak, str. 188-205. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:433032 (Datum pristupa: 16.04.2024.)

Brajčinović S, Begić Hadžipašić A, Medved J, Kožuh S. Influence of medium on corrosion and microstructural properties of HTCS-130 tool steel for hot work. 18th International Foundrymen Conference Coexistence of material science and sustainable technology in economic growth. Sisak: University of Zagreb Faculty of Metallurgy; 2019. Str. 188-205. [pristupljeno 16.04.2024.] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:433032

S. Brajčinović, A. Begić Hadžipašić, J. Medved i S. Kožuh, "Influence of medium on corrosion and microstructural properties of HTCS-130 tool steel for hot work", 18th International Foundrymen Conference Coexistence of material science and sustainable technology in economic growth Sisak: University of Zagreb Faculty of Metallurgy, 2019. [Online] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:433032 [Citirano: 16.04.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:433032
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Influence of medium on corrosion and microstructural properties of HTCS-130 tool steel for hot work
AutorSandra Brajčinović
AutorAnita Begić Hadžipašić
AutorJožef Medved
AutorStjepan Kožuh
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
In this paper the corrosion resistance of tool steel for hot work in the industrial emulsion medium (Lenox Band-Ade semi-synthetic oil + water, in ratio 1:10), water and 3.5% NaCl medium was tested. By Tafel’s extrapolation from polarization curves it was established that the tested tool steel showed extremely high corrosion rate in water and 3.5% NaCl medium in contrast to medium of Lenox BandAde emulsion. The double higher corrosion rate of tool steel is recorded in the chloride medium as opposed to that obtained in water, indicating that the tested steel is more corrosion resistant in water. The obtained results were confirmed by the method of electrochemical impedance spectroscopy. The sample of tool steel in the Lenox Band-Ade emulsion medium showed far greater value of charge transfer resistance Rct than that obtained in the water medium and 3.5% NaCl, which means that the Lenox Band-Ade emulsion formed a thicker oxide layer that has the role of barrier in further penetration of aggressive ions from the solution. The conducted SEM analysis after electrochemical measurements in 3.5% NaCl medium indicate the occurrence of pitting corrosion caused by breaking the passive surface of the material as a result of the action of aggressive ions from the solution. The EDS analysis of formed pits has been shown the increased oxygen content, but also the higher presence of sodium and chlorine, which accumulate in the pits, and come from the medium. Molybdenum and tungsten showed the highest presence in white deposits on the sample surface, which represent parts that did not completely cover with oxide layer, which is why the smallest oxygen content was recorded at these sites. The obtained corrosion rate values in the water medium and the chloride medium indicate that the studied tool steel is poorly stable in water and chloride media, and because of that it can only be used in exceptional cases under conditions in which it will come into contact with water or chloride medium.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov zbornika18th International Foundrymen Conference Coexistence of material science and sustainable technology in economic growth
Brojčani podacistr. 188-205
ISBN978-953-7082-34-5
URN:NBNurn:nbn:hr:115:433032
Datum objave publikacije2019
SkupNaziv: 18th International Foundrymen Conference Coexistence of material science and sustainable technology in economic growth
Lokacija: Sisak, Hrvatska
Datum početka: 2019-05-15
Datum završetka: 2019-05-17
Vrsta izlaganja: Postersko izlaganje
URL dokumentahttp://bib.irb.hr/1002275
Vrsta resursaTekst
IzdavačUniversity of Zagreb Faculty of Metallurgy
Mjesto izdavanjaSisak
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2019-05-22 08:29:58