prikaz prve stranice dokumenta Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement
  Preuzmi
PDF 5.07 MB
Znanstveni rad - Izvorni znanstveni rad
Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement
Metals, 10 (2020), 12; 1-16. https://doi.org/10.3390/met10121623
Stanić, Davor; Zovko Brodarac, Zdenka; Li, Letian

Citiranost:
,
Citirajte ovaj rad

Stanić, D., Zovko Brodarac, Z. i Li, L. (2020). Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement. Metals, 10. (12), 1-16. doi: 10.3390/met10121623

Stanić, Davor, et al. "Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement." Metals, vol. 10, br. 12, 2020, str. 1-16. https://doi.org/10.3390/met10121623

Stanić, Davor, Zdenka Zovko Brodarac i Letian Li. "Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement." Metals 10, br. 12 (2020): 1-16. https://doi.org/10.3390/met10121623

Stanić, D., Zovko Brodarac, Z. i Li, L. (2020) 'Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement', Metals, 10(12), str. 1-16. doi: 10.3390/met10121623

Stanić D, Zovko Brodarac Z, Li L. Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement. Metals [Internet]. 2020. [pristupljeno 09.04.2025.];10(12):1-16. doi: 10.3390/met10121623

D. Stanić, Z. Zovko Brodarac i L. Li, "Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement", Metals, vol. 10, br. 12, str. 1-16, 2020. [Online]. Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:217591. [Citirano: 09.04.2025.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:217591
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)Influence of Copper Addition in AlSi7MgCu Alloy on Microstructure Development and Tensile Strength Improvement
AutorDavor Stanić
AutorZdenka Zovko Brodarac
AutorLetian Li
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
(Zavod za procesnu metalurgiju)
(Laboratorij za željezo, čelik i ljevarstvo)
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
Commercial AlSi7Mg alloy represents the usual choice for complex geometry casting production. The market imperative to improve mechanical properties imposed the design of new chemical composition of AlSi7MgCu alloy with high content of Cu (up to 1.435 wt.%). This represents a challenge in order to achieve advanced properties. The interaction of a number of alloying (Si, Mg, Cu) and trace elements (Fe, Mn) influenced a wide range of complex reactions occurring and therefore leading to... Više intermetallic phase precipitation. The characterization of novel chemical composition interaction and its solidification sequence was achieved by modelling an equilibrium phase diagram, simultaneously performing both thermal analysis and metallographic investigations. Copper influence was indicated in the whole solidification process starting with infiltration in modified Chinese script phase Al15(Fe,Mn,Cu)3Si2, beside common intermetallic Al5FeSi. Copper addition encourages formation of compact complex intermetallic phases Al5Cu2Mg8Si6 and Al8(Fe,Mn,Cu)Mg3Si6. Solidification ended with secondary eutectic αAl + Al2Cu + βSi. Microstructure investigation allows volume reconstruction of the microstructure and distribution of particular phases. Chemical compositions enriched in copper content and developed microstructural constituent through solidification sequence of AlSi7MgCu alloy contribute to a significant increase in mechanical properties already in an as-cast state. Sakrij dio sažetka
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov časopisaMetals
Brojčani podacivol. 10, br. 12, str. 1-16, 1623
e-ISSN2075-4701
DOIhttps://doi.org/10.3390/met10121623
URN:NBNurn:nbn:hr:115:217591
Datum objave publikacije2020
URL dokumentahttps://www.mdpi.com/2075-4701/10/12/1623
Vrsta resursaTekst
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2024-04-26 11:50:06
accessibility

closePristupačnostrefresh

Ako želite spremiti trajne postavke, kliknite Spremi, ako ne - vaše će se postavke poništiti kad zatvorite preglednik.