prikaz prve stranice dokumenta The influence of the processing parameters on the porosity and microhardness of sintered Ti-20Nb biomedical alloy
  Preuzmi
PDF 628.56 KB
Znanstveni rad - Izvorni znanstveni rad
The influence of the processing parameters on the porosity and microhardness of sintered Ti-20Nb biomedical alloy
U: Conference Proceedings of 29th International Conference on Metallurgy and Materials METAL 2020. Ostrava, Czech Republic, EU: TANGER Ltd., 2020. str. 1129-1134. https://doi.org/10.37904/metal.2020.3581
Slokar Benić, Ljerka; Domitrović, Gorana; Erman, Žiga; Šubić, Jadranko

Citirajte ovaj rad

Slokar Benić, Lj., Domitrović, G., Erman, Ž. i Šubić, J. (2020). The influence of the processing parameters on the porosity and microhardness of sintered Ti-20Nb biomedical alloy. Conference Proceedings of 29th International Conference on Metallurgy and Materials METAL 2020 (str. 1129-1134). Ostrava, Czech Republic, EU: TANGER Ltd.. doi: 10.37904/metal.2020.3581

Slokar Benić, Ljerka, et al. "The influence of the processing parameters on the porosity and microhardness of sintered Ti-20Nb biomedical alloy." Conference Proceedings of 29th International Conference on Metallurgy and Materials METAL 2020, TANGER Ltd., 2020, str. 1129-1134. https://urn.nsk.hr/urn:nbn:hr:115:152746

Slokar Benić, Ljerka, Gorana Domitrović, Žiga Erman i Jadranko Šubić. "The influence of the processing parameters on the porosity and microhardness of sintered Ti-20Nb biomedical alloy." U Conference Proceedings of 29th International Conference on Metallurgy and Materials METAL 2020, 1129-1134. Ostrava, Czech Republic, EU: TANGER Ltd., 2020. Citirano 17.04.2024.. https://urn.nsk.hr/urn:nbn:hr:115:152746

Slokar Benić, Lj., et al. (2020) 'The influence of the processing parameters on the porosity and microhardness of sintered Ti-20Nb biomedical alloy', Conference Proceedings of 29th International Conference on Metallurgy and Materials METAL 2020, TANGER Ltd., Ostrava, Czech Republic, EU, str. 1129-1134. Preuzeto s: https://urn.nsk.hr/urn:nbn:hr:115:152746 (Datum pristupa: 17.04.2024.)

Slokar Benić Lj, Domitrović G, Erman Ž, Šubić J. The influence of the processing parameters on the porosity and microhardness of sintered Ti-20Nb biomedical alloy. Conference Proceedings of 29th International Conference on Metallurgy and Materials METAL 2020. Ostrava, Czech Republic, EU: TANGER Ltd.; 2020. Str. 1129-1134. [pristupljeno 17.04.2024.] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:152746

Lj. Slokar Benić, G. Domitrović, Ž. Erman i J. Šubić, "The influence of the processing parameters on the porosity and microhardness of sintered Ti-20Nb biomedical alloy", Conference Proceedings of 29th International Conference on Metallurgy and Materials METAL 2020 Ostrava, Czech Republic, EU: TANGER Ltd., 2020. [Online] Dostupno na: https://urn.nsk.hr/urn:nbn:hr:115:152746 [Citirano: 17.04.2024.]

Za citiranje koristite ovu mrežnu adresu: https://urn.nsk.hr/urn:nbn:hr:115:152746
Prijavite se u repozitorij kako biste mogli spremiti objekt u svoju listu.
Podaci o radu
Naslov (engleski)The influence of the processing parameters on the porosity and microhardness of sintered Ti-20Nb biomedical alloy
AutorLjerka Slokar Benić
AutorGorana Domitrović
AutorŽiga Erman
AutorJadranko Šubić
Autorova ustanovaSveučilište u Zagrebu
Metalurški fakultet
Znanstveno / umjetničko
područje, polje i grana		TEHNIČKE ZNANOSTI
Metalurgija
Sažetak (engleski)
Titanium based alloys are increasingly used in biomedicine due to their favourable properties. However, because of their high cost, new methods are being developed to produce more economical alloys. Therefore, in the framework of this work, Ti-20Nb alloy was produced by powder metallurgy. Namely, experimental alloy was prepared by mechanical alloying in a ball mill. The samples were singled out from the powder mixture and pressed on a hydraulic press. Sintering was carried out in a tube furnace in an argon atmosphere. Different processing parameters regarding the time and temperature of sintering were applied. Chemical homogeneity was analysed using the energy-dispersive spectrometry. Porosity was observed using the light microscope and microhardness was determined by Vickers method. The obtained results show that with a small correction of the applied technological parameters, in terms of time extension of mixing/mechanical alloying, it is possible to produce economically Ti-20Nb alloy having the properties suitable for biomedical application by using powder metallurgy technology.
Ključne riječi (engleski)
Jezikengleski
Vrsta publikacijeZnanstveni rad - Izvorni znanstveni rad
Status objaveObjavljen
Vrsta recenzijeRecenziran - međunarodna recenzija
Verzija publikacijeObjavljena verzija rada (izdavačev PDF)
Naslov zbornikaConference Proceedings of 29th International Conference on Metallurgy and Materials METAL 2020
Brojčani podacistr. 1129-1134
ISBN978-80-87294-97-0
p-ISSN2694-9296
DOIhttps://doi.org/10.37904/metal.2020.3581
URN:NBNurn:nbn:hr:115:152746
Datum objave publikacije2020-07-27
SkupNaziv: 29th International Conference on Metallurgy and Materials METAL 2020
Lokacija: Brno, Češka
Datum početka: 2020-05-20
Datum završetka: 2020-05-22
Vrsta izlaganja: Postersko izlaganje
URL dokumentahttps://www.confer.cz/metal/2020
Vrsta resursaTekst
IzdavačTANGER Ltd.
Mjesto izdavanjaOstrava, Czech Republic, EU
Prava pristupaOtvoreni pristup
Uvjeti korištenjaIkona licence Zaštićeno autorskim pravom.
Datum i vrijeme pohrane2021-07-13 07:33:05